COPAK wall-mounted EV charger and coiled cable in a private apartment parking bay

Apartment EV charger installation cost calculator

Estimate one private AC charger supplied from your apartment distribution board.

Charger and cable route

Who supplies the charger?COPAK packages include dynamic load management to adjust charging to available power. For your own charger, mounting and commissioning are quoted separately.Apartment electricity supplyCheck your apartment drawings or ask building management for the phase.Cable size (mm²)Use the conductor size specified for your installation. COPAK will verify it.Total route length (m)Measure from the apartment DB to the charger once. Existing accessible trays or walls up to 3 m high are standard. COPAK will verify cable size and capacity.

What does the cable route look like?

Open the cards that match your route. Leave the others blank. These lengths are part of your total route. For overlapping high and restricted sections, select nonstandard conditions below.

Metal cable channel fixed to a wall

Measure the wall length needing a new metal channel to protect the cable.

Affected length (m)

Metal cable channel hanging from the slab

In open parking areas, metal rods may hang from the concrete slab to hold a cable channel. Enter only the length needing new suspended channel. A false ceiling alone does not count.

Affected length (m)

Cable hidden in a hard-to-reach space

If 8 m of a 40 m route runs above fixed gypsum or behind finishes where the installer cannot easily reach, enter 8 m. Do not count easy-to-reach cable trays.

Affected length (m)

Cable more than 3 m above the floor

For sections above 3 m and up to 5 m high, measure along the cable path, not up from the floor.

Affected length (m)

Cable beneath paving blocks

Measure where paving blocks must be lifted and replaced after digging.

Affected length (m)

New openings in a gypsum ceiling

Count new openings needed to reach the cable. Enter 2 for two openings, whatever the route length.

Number of openings

Crossings through fire-rated walls or floors

Count crossings that need a fire-resistant seal around the cable. Ask building management if unsure.

Number of crossings

Additional 4-pole isolatorA separate switch to disconnect the charger supply. Select only if specified. Overlapping restricted/high work, work above 5 m or other nonstandard conditionsThese works require an individual quote.

This estimate is based on information provided by the customer. The final price may vary with actual site conditions identified during a pre-installation survey or at installation. DEWA and other authority approvals, fees and building NOCs are excluded and can be quoted separately.

Installation scope

What does the apartment estimate cover?

This estimate is for one private AC charger powered from your apartment’s own distribution board (electrical panel) in the UAE. Choose a COPAK charger with dynamic load management or use your own charger. The total includes 5% VAT. Authority approvals and building no-objection certificates (NOCs) are quoted separately if needed.

Tools and support

Other charging tools and installation help

Parking at a villa or townhouse? Use the villa and townhouse installation cost calculator.
Still choosing a charger? Use the EV charger selector to explore options for your car.
Planning the installation? Read about home EV charger installation.
Unsure how the cable will reach your parking bay? Contact COPAK about an apartment site survey.

Apartment EV charger installation cost calculator

Your details

Charger and cable route

Your installation estimate

What does the apartment estimate cover?

Other charging tools and installation help

COPAK

Shop and Services

Contact COPAK